 Stainless Steel Flexible Gas Appliance Connectors
Stainless Steel Flexible Gas
Appliance Connectors is especially
applied to the connection between
cooking appliance and gas valve
at the end of gas transmitting
pipe . Owning the advantages
of anti-corrosion, good sealing,
nice appearance, long using
duration and convenient installation&
disconnection, and high flexibility,
it can greatly avoid the occurrences
of aging, leakage, toxicosis
and explosion etc., which usually
arise from the use of rubber
hoses.
 |
 |
 |
Stainless
Steel flexible hose |
S.S
Dense Flexible Hose |
S.S Flexible Hose with coating
|
| Item
No. |
DN |
Thread Type |
Seal Type |
| RQ-08-SM18X1.5-G1/2 |
DN08 |
One
end Female M18X1.5;
one end Female G1/2”. |
Two
ends flat-sealed by
rubber gaskets. |
| RQ-08-SG1/2-C9.5 |
DN08 |
One
end Insert φ12mm(I.D);
one end Female G1/2”. |
One
end insert-sealed by
rubber gasket, one end
flat-sealed by rubber
gasket. |
| RQ-08-C9.5 |
DN08 |
Two
ends Insert φ12mm(I.D). |
Two
ends insert-sealed by
rubber gasket. |
| RQ-08-SG1/2 |
DN08 |
Two
ends Female G1/2”. |
Two
ends flat-sealed by
rubber gaskets. |
| RQ-10-SG1/2 |
DN10 |
Two
ends Female G1/2”. |
Two
ends flat-sealed by
rubber gaskets. |
Characteristics:
1.Anti-aging,taint-resistant:SUS304/SUS316L;
2.Safety guarantee:insurance
covered by PICC;
3.Quality guarantee:ISO9001
certification;
4.Cautery-resistant:SUSS304,HP59
copper with chrome plate;
5.Flexibility:annular corrugation,it
can be bent at any direction
10 times upon large than the
minimum bend radius;
6.Inspection department:china
Gas Appliances inspection Center;
7.Reputation:Superior product
Recommended by Nanjing Gas Appliances
Management Department.
Installation Instruction:
1.Select applicable type and
length;
2.Put the nuts on hose in advance
before installation and make
sure rubber gaskets in the ports
are all right;
3.Turm off gas switch before
installation;
4.When turning the nuts ,try
to avoid any violence ,which
may destroy the rubber gaskes;
5.Using soap water to check
whether there is a leakage after
installation;
6.Special design and manufacture
can be done according to client's
requirement.
|
